67
EN
10-364
Hold master transponder in front
of device
• Hold master transponder in front of device.
Master transponder
recognized: programming possible
• a positive confirmation tone sounds
• LED lights up green during 3 sec.
G
Wrong, unknown master
transponder
• When holding the transponder in front of the device, a negative
confirmation tone sounds.
• LED lights up red during 3 sec.
R
• LED off again
• If the master transponder is held in front
of the device incorrectly 3 times, the code
entering function is blocked for 2 min.
• The LED lights up red for 2 min.
• Start again.
9.2. Programming transponder
Start the programming
if not already done
all memory locations empty
The number of the transponder will be registered in the next free
memory location.
MlNo
= number of the memory location
00 to 09
hold transponder in front of device
Briefly hold the transponder in front of the device once.
the transponder has been
programmed
• a positive confirmation tone sounds
• LED lights up green during 3 sec.
G
• LED flashes green again
G
program other transponders
Repeat the steps.
only 1 memory location available
• LED flashes orange
O
all 10 memory locations have been
assigned
• LED lights up orange
O
transponder is denied:
memory location already in use or
transponder already programmed
on another memory location
• When holding the transponder in front of the device, a negative
confirmation tone sounds.
• LED lights up red during 3 sec.
R
• LED flashes green again
First delete the memory location.
G
Number of transponders which can be programmed: up to 10.