Niko 10-364, Product Information, Page: 63 / 88

63 EN
10-364
transponder is denied:
• memory location already in use or
• transponder already programmed
on another memory location
When holding the transponder in front of the device, a negative
confirmation tone sounds.
• LED lights up red during 3 sec. R
• LED flashes green again
Either delete the assigned memory
location or the transponder on the
incorrectly programmed memory
location.
R
Number of transponders which can be programmed: up to 50.
8.4.3. Remove transponder
Start the programming
if not already done
Enter the following key
combination on the infrared remote
control.
* 3 # MlNo #
MlNo = number of the memory location 0 to 49
remove assigned memory location
• LED lights up green during 3 sec.
G
• a positive confirmation tone sounds
assigned memory location removed • LED flashes green again G
memory location is not assigned
• LED lights up red during 3 sec.
R
• a negative confirmation tone sounds
• LED flashes green again
G
8.4.4. Remove all transponders
Start the programming
if not already done
Enter the following key
combination on the infrared remote
control.
* 94 # master code # master code #
Master code = max 6 digits
• LED lights up green during 3 sec.
G
• a positive confirmation tone sounds
all transponders removed • LED flashes green again
G
Number of transponders which can be removed: up to 50.