![background image](http://html.mh-extra.com/html/niko/10-285/10-285_manual_1689537045.webp)
10-285 / 10-385
45
EN
6.3. Replacing the external unit
All programmed data such as serial numbers and parameters are stored in the EEPROM. If the external unit needs to be replaced, the EEPROM storage can be
removed from the programmed external unit and installed into the new, comparable external unit. This is done as follows:
1. Save the database (see programming guide PH010-285).
2. Open the housing.
3. Disconnect the display from the power supply: pull off the connection socket.
4. The EEPROM storage is located in the electronic part of the display module. Remove the EEPROM storage.
5. Click the EEPROM into the new external unit (display module).
Ensure that the electronic components are aimed towards you when placing the EEPROM.
6. Reconnect the external unit to mains voltage.
7. Load the database (see programming guide PH010-285).
After loading has been completed (step 7), remove the EEPROM from the display module. Otherwise the real-time clock will no longer work.
7. TECHNICAL DATA
Reference code
10-285 (without camera)
10-385
Dimensions flush-mounting box 10-285
420 mm x 180 mm x 50 mm (H x W x D)
Dimensions flush-mounting box 10-385
540 mm x 180 mm x 50 mm (H x W x D)
Dimensions front plate 10-285
440 mm x 200 mm x 3 mm (H x W x D)
Dimensions front plate 10-385
560 mm x 200 mm x 3 mm (H x W x D)
Power supply voltage
24 Vdc ± 8 %
Material front plate
Stainless steel
Material flush-mounting box
Steel zinc-coated
Material modules
Anodized aluminium
Weight: 10-285
2780 g
Weight: 10-385
3480 g
Colour Alu/black
Protection degree
IP44
Video signal
1 Vpp, symmetrical
Allowable ambient temperature
-20°C tot +50°C
Marking
CE marking
8. MAINTENANCE
With the following maintenance tips you will avoid surface damage:
• Clean the product with some soap and a damp cloth.
• Never use:
- abrasive sponges or abrasive detergents;
- maintenance products that contain solvents or acids, or cleaning products containing acetic acid.
9. WARNINGS REGARDING INSTALLATION
• The installation should be carried out by a registered installer and in compliance with the statutory regulations.
• This user manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners. Additional
copies are available on the Niko website or via the Niko support service.
• During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC declaration of conformity regarding this
product at www.niko.eu.
Summary of Contents for 10-285
Page 1: ...10 285 10 385 1 ...
Page 2: ...10 285 10 385 2 ...