Niko 10-285, Manual, Page: 39 / 52

10-285 / 10-385
39 EN
2.4.4. Camera module (10-385)
Camera
Connector for the connection of an extra module
Bus and video connector
Technical data:
Power supply + 24V ± 8 %
Housing Anodized aluminium
Lens Acrylic glass
Camera screen Plastic
H x W x D 105 x 105 x 43 mm
Weight 305 g
Allowable ambient temperature -20°C to + 50°C
Input current in standby I(P) = 0 mA
I(P) = 90 mA
Max. input current I(P) = 90 mA
Video signal Symmetric 1Vss FBAS
Camera type Sony super HD CCD sensor
0,8 mm (1/3 inch)
Resolution 420 lijnen (TVL)
Light sensitivity 0,2 lux bij F2.0
Lens F 2.0, board lens
Focal point f = 3,6 mm
Angle ± 90° diagonally
Cabling 5-wire cabling
Note: Recommended mounting height of the camera: 1.60 m to 1.70 m.
Short description:
• Automatic switching between black-white and colour
3. INSTALLATION
3.1. Cabling
Which type of cable should I use?
The external audio unit 10-285 is wired with a 3-wire twisted cable for optimal quality. The diameter of the wires will determine the maximum distance between
the power supply and the internal or external unit. The table below provides an overview of the maximum distance per type of cable.
10-285
Cable diameter Maximum distance
0,5 mm (UTP) 100 m
0,6 mm (bv. TPVF) 160 m
0,8 mm (bv. SVV, TVVF, JYSTY, …) 280 m
The external video unit 10-385 is wired with a 6-wire twisted cable for optimal image quality. The diameter of the conductors determines the maximum distance
that can be bridged between the power supply and the internal video unit, or between the power supply and the external video unit. The table below provides
an overview of the maximum distance per type of cable.
10-385
Cable diameter Maximum distance
0,5 mm (UTP) 45 m
0,6 mm (bv. TPVF) 65 m
0,8 mm (bv. SVV, TVVF, JYSTY, …) 115 m
1
2
3
a
b
P
V1
V2
1
2
3