JAA79051-R.3624.A
- L29 ･ AF-S DX18-70/3.5-4.5G -
ADJUSTMENT (DIVISION) OF FOCUS MOVEMENT (T, W)
１．
Align the infinity (
∞
) mark of the focus ring with the index.
２．
Fix the aperture lever so that the aperture becomes "full".
３．
Read the values of the Wide and Tele sides.
４．
Carry out the following calculations.
Ａ － Ｂ ＝ Ｃ
Ａ＝
Value of Tele side
Ｂ＝
Value of Wide side
Ｃ＝
Adjustment amount (mm) of the 2nd lens group unit washer (#79)
５．
Adjust the thickness of the washer (#79) by the value of C calculated in the above. If C is positive, increase the
washers to thicken. If it is negative, decrease the washers to thin. (Refer to P. L28.)
Note
：
When putting the washers (#79), put a thin washer between thick washers.
ADJUSTMENT OF BACK FOCUS
１．
Align the infinity (
∞
) mark of the focus ring with the index.
２．
Fix the aperture lever so that the aperture becomes "full".
３．
Read the value of Wide or Tele side.
４．
Remove the bayonet mount.
５．
Adjust the thickness of the washer (#78) by the difference from the standard value. If the difference value is
positive, increase the washers to thicken. If it is negative, decrease the washers to thin. (Refer to P. L25.)
Focal length (f)
Standard (mm)
１８ｍｍ
－０．
０１～＋０．
０５
３５ｍｍ
－０．
０４～＋０．
１５
５０ｍｍ
－０．
０８～＋０．
２５
７０ｍｍ
－０．
１４～＋０．
２０
INC
