32
Wind the line firmly into groove of the
spool in the winding direction for the
line LH.
Note
●
Carefully wind the cutting line evenly, taking
care not to wind irregularly.
When the line [4] is wound to the end
hook both line ends into respective
notch [5] of spool for retaining
tentatively the line while leaving line
[4] ends approximately 4 in (10 cm)
beyond notch.
Align notches of spool for the line with
groove of eyelets and fit spool cover.
Pull out the line [4] from cover.
(1) Remove the line [4] from respective
notch of spool.
(2) Pass it through groove of respective
eyelet.
7
[5]
[4]
8
9
[4]
10