19
3.2 Installation of Grass Debris Shield
Follow the procedure below to install the grass debris shield.
If the blades are provided, remove the blades before performing this work.
Note
●
If a grass cutting steel blade is installed, a different grass debris shield is required (included in blade kit).
However, the installation procedure is the same.
Grass debris shield for cutting-line head
Grass debris shield for grass cutting steel blade
(Option)
Cutting knife
●
Do not remove the grass debris shield. If the grass debris shield is damaged, contact your servicing
dealer.
Set the start/stop switch to OFF (O side) to stop the engine.
Remove the attachment from the powerhead.
Put on gloves.
Install the grass debris shield [2] and
the plate [3], and fix it to the gear case
[1]
by tightening with the fixed screw [4]
(4pcs.).
The fixed screws can be
tightened using the tool supplied with
the UMC powerhead.
1
2
3
[4]
[3]
[1]
[2]
4