13
2. Outline
2.1 Name of Parts and Their Functions
The trimmer/brush cutter is a device with the attachment installed to the powerhead (separately sold).
The following is the structure of the attachment and name and function of each part.
Note
●
There are two types of powerheads. For details about the powerhead, refer to the powerhead manual.
2
5
3
4
1
No.
Name
Description
1
Cutting-line head
Rotates at a high-speed and cuts grass, weeds and shrubs, etc. by the
cutting line.
The cutting line rotates counterclockwise as viewed from the operator.
2
Blade holder
A part to install the cutting-line head to the gear case.
3
Gear case
Changes rotational angle from the powerhead to the cutting head.
4
Grass debris shield
Guards from objects such as grasses, stones and sand scattered by the
cutting-line head. This also cuts the cutting line to the correct length.
5
Shaft tube
It is the main frame. The power transmission shaft is inside this tube.
2.2 Specification
■ Standard Specification
Item
Specification
Cutting-line head (Attached Material)
Diameter
16.5 in (420 mm)
Grass cutting steel blade (Blade kit option)
Diameter, #teeth, arbor
9 in (230 mm), 4T, 1 in
Grass cutting steel blade (Blade kit option)
Diameter, #teeth, arbor
10 in (255 mm), 4T, 1 in
Note
●
Grass cutting steel blade and blade kit are separately sold. For genuine parts, contact your servicing
dealer.