manualshive.com logo in svg

NIKKARI BL-J, Instruction Manual, Page: 7 / 30

Share
Download
NIKKARI BL-J Instruction Manual Download Page 7

NIKKARI Blower Attachment  BL-J

E3502-0

7

1.2  General Precautions

1.2.1 Overall Precautions

When installing the blower, make sure that the knob BT is tightened.

*  Otherwise, it could cause the blower to fall off.

Do not allow minors to operate the blower.

*  It could cause a serious accident.

Do not modify the blower.

*  It could deteriorate the performance, resulting in a serious accident due to deterioration 

on safety.

Do not install any unapproved split engine to the blower.

*  The blower could come off during use, resulting in a serious accident.

When renting the blower to any third person, attach the instruction manual and 
attached materials to the blower.

*  If it is mis-operated, a serious accident could happen.

1.2.2 Precautions on Clothes

Wear a hard hat when using or transporting the blower.

*  It could cause injury to head.

Wear appropriate personal protective equipment when using the blower.

*  Otherwise, it could cause injury.

Wear a goggle when using the blower.

It is recommended to also use face shield (or face screen) together.
*  If they are not used, it could cause eye injury due to scattering of chips of wood.

Wear hearing protective equipment including year mufflers when using the 

blower.

*  Hearing loss could be developed due to noise of the engine.

This is a manual downloaded from the web site.

Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.

Summary of Contents for BL-J































Reviews:

No comments