NIKKARI Blower Attachment BL-J
E3502-0
18
3.1.2 Connecting
Loosen the knob BT [2].
Insert the shaft tube [3] into the joint
case [5] until it reaches the position of
the label [4].
Make the label [4] face up, and match
the positions of the positioning hole [1]
and the positioning pin [6].
Tighten the knob BT [2].
If the knob BT [2] cannot be tightened
completely, the positions of the posi-
tioning hole [1] and the positioning pin
[6] are not matched. Loosen the knob
BT [2] for appropriate positioning, and
tighten it.
[2]
1
[4]
[3]
[5]
[1]
[6]
2
[2]
3
This is a manual downloaded from the web site.
Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.