Niigata seiki PROFESSIONAL DI-10KD, User Manual

Page: 4 / 4

TROUBLESHOOTING
SPECIFICATIONS
■
Origin position shifts during measurement.
・
Temperature changes during measurement can cause repeatability error. Please try the following solutions:
●
Use in location with constant temperature.
●
When taking measurements, periodically adjust zero point using a Master reference to correct for temperature
induced drift.
■
Measurement is not stable, or measurement accuracy is poor.
・
Contact Point may be worn.
Worn Contact Point will affect accuracy. Periodically check for wear, and replace if wear is affecting measurement
accuracy.
Remove any dust or dirt after use.
※
Do not lubricate.
・
Wipe any contamination from Spindle sliding surface using a dry cloth, or cloth moistened with alcohol.
・
To clean other surfaces, wipe with a soft dry cloth, or a cloth moistened with a mild cleaner.
Check for wear of Contact Point.
・
Measurement accuracy will be affected by worn Contact Point. Regularly check for wear and replace
Contact Point if worn.
Store in provided case in a cool, dark, and dry location.
・
During storage, make sure there is no force on the Spindle (such as pushed in, or lateral force.)
・
Keep away from moisture and direct sunlight, and secure from unauthorized personnel.
I360-K 1803
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5670 Fax. : +81-256-39-7730
MAIL intl.sales@niigataseiki.co.jp
URL http://www.niigataseiki.co.jp
CALIBRATION
●
Replacement Contact Point Part No.
：
DI-10KD
･
DI-10
…
DI-CPK
、
DI-1058
…
DI-CP
WDI-0158SP
･
WDI-0558SP
･
WDI-1058SP
…
WDI-W
AFTER USE CARE, STORAGE
To maintain measurement accuracy, periodic calibration is recommended.
(For reference, we recommend a calibration interval of 3~4 months when used in a factory.)
Outside Japan, Please contact distributor or place of
purchase to inquire about calibrations services.
DI-10KD
DI-10
DI-1058
WDI-0558SP
WDI-1058SP
WDI-0158SP 0.01
0.01
0.01
0.01
0.01
0.001 5
5
5
3
3
2
≦
1.5N
≦ 1.5N
≦ 1.5N
≦ 1.5N
≦
1.5N
≦ 2N
1
1
1
1
1
0.2 0
〜
10
0
〜
10
0
〜
10
0
〜
5
0
〜
10
0
〜
1
±
0-100
±
0-100
±
0-100
±
0-100
±
0-100
0-100-0
Model No. Scale
Contact
Point
125
125
180
190
190
190
Weight
(g)
Graduation
(mm)
Measurement
Range
(mm)
Retrace
Error
(
μ
m)
Measuring
Force
(N)
Range
(1 rev.)
(mm)
8
8
8
8
10
3
±
20
±
20
±
20
±
16
±
20
±
5
5
5
5
3
3
0.3
Adjacent
Error
(1/10rev.):
(
μ
m)
Full Range
Accuracy
(
μ
m)
Repeat
Accuracy
(
μ
m)
Carbide
Ball
Steel
Ball