3
OVERVIEW
IMPORTANT: THE INTALLATION OF THIS FITTING MUST BE DONE BY A QUALIFIED ELECTRICIAN.
This fitting must be earthed.
Do not mount the luminaire against inflammable surfaces.
The motion detector will not operate correctly if it is installed:
( ) Near the outlet of a central heating boiler
( ) Near air conditioning equipment
( ) Pointing directly at moving vehicles
( ) Within sight of reflection from moving water
( ) Where other lamps could shine onto the detector
NOTE:
This highly responsive unit may occasionally activate due to rapid environmental changes. Allow for
approximately 30 seconds warm-up time before the sensor resumes normal activity.
MOUNTING THE FITTING
To ensure correct operation of the sensor, mount the luminaire that traffic passes across the detector.
f
Push-button
3 motion sensors
WARNING ! ! !
BEFORE ATTEMPTING ANY INSTALLATION OR
MAINTENANCE, ENSURE THAT THE
ELECTRICAL SUPPLY IS SWITCHED OFF AND
THE CIRCUIT FUSES REMOVED OR THE
CIRCUIT BREAKER IS IN THE “OFF”POSITION.
TOP VIEW
GOOD SENSITIVITY
LESS SENSITIVITY