5
FUNCTION
This light is equipped with 3 motion sensors: zone 1 covers 60 degree, zone 2 covers 100 degrees and zone 3
covers 60 degrees. 220 degrees (maximum) in total for 3 zones.
The light will switch on for 3 minutes and off automatically when heat/ movement is detected.
The factory default: the light on fixed at 3 minutes and works at nighttime.
To change the mode to nighttime only, push the button at the bottom of the housing and the hidden LED
indicator will turn red under this mode. The light will be on at 3 minutes when detecting any movement at
night.
Push-button for programmable functions:
- Nighttime mode: light works at night only Push Button
- All day mode: light works on day and night
Reset function: If the stepper motor of tracking light works abnormal, the hidden LED indicator will flash in red
and the light will stop turning automatically. In All Day mode, the red light will flash for 5 seconds and off for 5
seconds; in Nighttime mode, the red light will flash in regular pattern. Please simply switch off and on the
main power to resume the tracking light. Below are the possible abnormal situations.
-
External force: the light head is blocked by objects or is blown by strong wind and is unable to turn properly,
the hidden LED will flash in red to signal users the abnormal situation.
-
Stepper motor: when stepper motor is going to be out of its lifetime or is damaged, the hidden LED will flash
in red to signal users the abnormal situation. Please switch off and on the main power, the tracking light
now may or may not resume its operation. If the stepper motor stops working, AEC-9331 becomes a
regular motion sensor security light.
Left 70°
Right 70°
ZONE 1
ZONE 2
ZONE 3
TOTAL DETECTION RANGE
Hidden LED indicator