9
III. OPERATION
When NW2202 detects any movement, the wireless LCD monitor is triggered
for 30/60 seconds
image at the same time. The
unobstructed transmission effective range is about 80 meters, but actual transmission range may vary according to
weather, location, interference and building. One wireless LCD monitor is possible to display 4 camera images.
OPERATION OF WIRELESS
HANDHELD SCREEN RECEIVER
1. LCD image display
：
push view button
「
1/4
」
for image display
-Single View
：
single CAMERA view (initial image<original default>)
display image from one camera at one time
-Quad View
：
4 split view (able to connect 4 CAMERAS and
display 4 images on screen at the same time)
☆
When SENSOR is triggered, the monitor will sound ”BEEP”
(“BEEP” is set “ON” condition)
No. 1 sensor light detects motions, sound”BEEP” once
No. 2 sensor light detects motions, sound”BEEP-BEEP” twice
No. 3 sensor light detects motions, sound”BEEP-BEEP-BEEP”3 times
No. 4 sensor light detects motions, sound”BEEP-BEEP-BEEP-BEEP” 4 times
☆
BEEP will sound continuously for 20 times and stops if there is no further detection.
During 20 times of BEEP if this unit detects any motions, it will recount for 20 times.
☆
Push any of the buttons to stop”BEEP”.
☆
When BEEP is set “OFF”, there will be no sound.
☆
「
View Mode
」
is set”MENU”(manual) , the number of camera will flash under quad-view.
2. Function settings
：
push “MENU “button to choose settings.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
This is only for connecting 1 CAMERA.
For connecting several CAMERAS, make sure to return
to quad-view after finishing setting in single view.
