7
NIGHTWATCHER SURVEILLANCE PLUS
Wireless Handheld monitor
I. OVERVIEW OF AEC-711C
II. ASSEMBLY INSTRUCTION
1. Install 3pcs NI-MH rechargeable batteries to the battery compartment with its polarities
matched.
Note:
- This receiver can also be powered on by adapter (DC 6V 1.5A).
- The rechargeable battery will be charged after the adapter is plugged in, and the charge indicator
lights up during charging and will turn off after a full charge.
- A full charge will take about 6 hours, which can power the receiver for about 4 hours
continuously.
-
You are recommended to have the battery fully charged before its first installation to optimize its life.
-
Do not burn or disassemble the rechargeable battery.
-
Do not short-circuit the battery; it may cause fire or electric shock.
2. Push the power switch to
ON
position.
Battery case
Rechargeable
battery (inside)
LCD
LCD/TV Button
MENU Button
OK Button
Channel Button
Buzzer
Antenna
LED indicator
Power switch
Video Output
Power Socket
Holder
View Button (1/4)
(Single/Quad)
