34
J. WARRANTY INFORMATION
Nieco Corporation - Model N1535
February, 2003
Nieco Automatic Broiler Warranty for Yum! Broilers
This warranty is effective for all broilers listed in Appendix A, shipped after the test period. This warranty
is valid for Nieco Broilers in the US and worldwide, to the extent possible due to specific warranty laws,
requirements, commercial practices or customs in various countries.
Your new Nieco Automatic Broiler is guaranteed against original defects in manufacture of machines and compo-
nent parts for one year. This one-year guarantee is subject to certain conditions and limitations as listed below.
Generally, your guarantee provides replacement of all parts which fail due to defects in manufacture for one year
after startup of the machine. Parts purchased, not manufactured, by Nieco, are covered by the original manufac-
turer’s warranty. Parts which fail will be replaced by the Nieco distributor or Service Center in your area who did
the startup service. If the part is a customer installed component, the part will be sent to you to replace the
defective part on your machine, yourself. If the part is one listed in Appendix A, your Service Center will provide
the labor to replace it, subject to certain conditions noted below. The parts which will be replaced for you are
generally parts which require a certain or higher service level for installation, calibration or adjustment. The
parts that will be installed/replaced for you are listed in Appendix A. They are listed by broiler model.
If your broiler has a manufacturing defect which requires service labor to repair, those repairs will be performed
by your startup Nieco Service Center or Distributor. Those repairs will be performed subject to certain conditions
as mentioned below.
Nieco guarantees the correct mechanical operation of the equipment at the time of startup of the machine by an
authorized Nieco servicer. Nieco makes no warranty, expressed or implied, of broiling effect or of exact capacity
as subjective judgment, product variations and/or customer-caused machine conditions beyond Nieco’s ability to
predict or control may alter the broiling performance of the machine. Both Yum! and Nieco have extensively test-
ed Nieco broilers prior to Yum!’s approval of Nieco broilers for Yum! system products and restaurants.
Nieco specifically does not warrant or guarantee or provide compensation for any lost production, lost product,
lost labor or lost sales or other consequential damages that may occur as a result of equipment malfunction or
failure. This disclaimer of liability for consequential damages applies whether the cause of malfunction or failure
is otherwise covered by our warranty or not. In any event, Nieco’s liability shall be limited to replacement of the
equipment or return of the equipment and refund of the original purchase price.
When your purchased your Nieco broiler, startup service was included in the purchase price if you are located in
a territory covered by a Nieco Distributor or Service Center. This startup service is not delivery or installation or
hookup. The startup service is to verify the correct mechanical operation and broiling performance of the
machine, make any necessary adjustments and calibrations and provide answers to any machine questions
about operations, cleaning, assembly or re-assembly. The startup service is not a training service; however, your
servicer will provide all information they can about the machine. The servicing Nieco Distributor or Service
Center will provide all warranty and after-sales service and parts to you.
Startup of your machine by an authorized Nieco Service Center or Distributor is required to validate your warran-
ty. This validation may be done directly with the factory if the startup is done by the customer or by a non-Nieco
servicer. Nieco does not provide startup compensation to non-Nieco servicers. Nieco does validation automati-
cally upon receipt of the startup report from your servicer. We strongly recommend you assure validation by
returning the warranty card shipped with the machine. If an authorized Nieco servicer did not perform a startup,
warranty will be validated upon receipt of your warranty card. If a startup is not performed and submitted to the
factory, the warranty period starts on the date the machine was shipped from the factory, since no other dates
are confirmed by a Nieco authorized servicer.
