15
Nieco Corporation - Model MPB73
Instructions
1. Allow the broiler to run free of product for 15
minutes before turning it off. This allows any
residue to burn off the chains.
Shut the broiler off and let it cool for 30 minutes
before disassembly and cleaning.
Close the main gas valve and unplug the broiler
before cleaning.
Always leave the ventilation hood on during the 30
minute cool down period.
Use only approved cleaning solutions.
Allow parts to air dry after cleaning.
NOTE: For clarity, some instructions are shown
without using high temperature gloves. Always use
gloves when the glove icon is shown.
Cleaning the Broiler
3-Compartment Sink
No-Scratch Pad
Scrub Pad
Towel
Heat
Resistant
Gloves
Degreaser
Soft Bristle
Brush
Utility
Knife
Small Orifice
Brush
Shaft Cleaning
Tool
Tools Needed
1.
2.
This “Stop” sign shows a step in the procedure that
must be followed exactly or personal safety could
be affected.
This warning symbol shows a step in the procedure
that must be followed exactly or broiler
performance could be affected.
This “puzzle” symbol shows a step in the
reassembly procedure that must be followed.
3.
4.
5.
!
Important Symbols
STOP
6.
Large Orifice
Brush
Pull the release pin.
Lift push bar and wire belt feeder bases up and off.
Wash, rinse, and sanitize in the 3-compartment sink
or dishwash.
REASSEMBLY: Pull the release pin and place feeder
base in position.
Wire Belt Feeder Base
P/N
17548
(LH)
17541
(RH)
Feed End
Tools
Instructions
3-Compartment Sink
Clean: Every 4 hours / per shift
1.
2.
3.
Scrub Pad
Pull release pin
