Dual VELOCITY
™
Toaster
© 2022 Nieco, LLC All Rights Reserved. Printed in the USA.
11
This equipment is built to comply with applicable standards for manufacturers, including approval agencies,
such as ETL. Many local codes exist, and it is the responsibility of the owner and installer to comply with
these codes.
Check the electrical rating label to ensure that the equipment is connected to the correct voltage, phase,
amperage and wattage that are stated on the equipment’s identification label. The identification label is
located on the back plate of the equipment. A secondary label is included inside the equipment’s back plate.
This equipment should be connected to a power supply that is 208 Volts, 60 Hz, AC only. Do not operate on
direct current (DC). A substantial voltage drop will cause a loss of power and may damage the equipment. If
the equipment does not operate when plugged into an outlet, check the power supply.
Observe all clearance requirements to provide air supply for proper operation, as well as sufficient clearance
for servicing. Keep the area around the equipment free and clear of combustibles. Dimensions and clearance
specifications are shown under “Specifications for Dual
VELOCITY™
Toaster Ex6350” and “Clearance
Requirements for Dual
VELOCITY™
Toaster Ex6350”.
WARNING:
The installation and connection must comply with national and local electrical codes.
Ensure electrical supply conforms with electrical characteristics shown on the identification label.
All services must be performed by a qualified technician.
WARNING:
Keep cord clear of the working area. Position the electric cord so that it will not get caught
on other equipment or interfere in work space. Failure to do so can result in serious personal injury.
WARNING:
Check cords before each use. If damaged, replace immediately. Never use equipment with a
damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.
SITE PREPARATION AND INSTALLATION
This equipment must be
installed in accordance
with the following
minimum clearances in
order to provide proper
operation and servicing
of the appliance.
Also, it is recommended
that the equipment be
installed with sufficient
clearances to provide
proper cleaning and
maintenance.
CLEARANCE REQUIREMENTS for Nieco Dual
VELOCITY™
Toaster Ex6350
BACK
2"
LEFT SIDE
1"
RIGHT SIDE
1"
FRONT
12"
