26
Nieco Corporation - Model JF91E
This page intentionally left blank.
No power to broiler when the switch is turned on.
Power is on, but the conveyor belts are not turning.
Feeder belt not moving.
Feeder jams.
Burgers sticking to slide or stripper blade.
CooKInG PRobleMs
Burgers under or over cooked.
Excessive flaming in broiler.
Check: Broiler is plugged in.
Ventilation hood is on.
Circuit Breaker on wall panel is on.
Check for a jam in the conveyor belt. Check the stripper
blade to make sure they are installed properly.
Make sure the feeder is assembled properly.
Check for jam.
Make sure the drive pin is engaged.
Make sure the burgers are not frozen together.
Clean the slide and stripper blade very thoroughly.
Check cookout temperature (undercooking).
Adjust conveyor belt speed.
Clean the catalyst if equipped.
Check the hood for proper operation.
Check product for overcooking.
always verify that the broiler is properly assembled, the hood is on, and the broiler is plugged in.
G. TRoUblesHooTInG
220V Wiring
