Nidek Medical LM-7, Operator'S Manual

Page: 76 / 108

74
4. CONNECTION AND SETTINGS : Operation when Peripheral Devices are Connected
●
When entering operator and patient IDs
Select the patient entry or operator entry.
1)
Press the barcode button .
The color of the button changes. This is the setting for reading operator IDs.
2)
Read the operator ID.
The read operator ID is displayed. Then the human icon is displayed on the barcode but-
ton.
To change the operator ID, press the barcode button again. After the color of the button changes, read
another barcode.
3)
Read the patient ID.
The glasses icon is displayed on the barcode button.
To change the patient ID, read another barcode with the glasses icon displayed.
• Use a CODE39 barcode.
• Use magnetic cards utilizing a magnetic stripe format compliant with ISO 7811, AAMVA, and CA
DMV.
• When there is no data after the reading start position set by the Read beginning of reader param-
eter, ID is not displayed.
• When reading the operator ID is attempted, the human icon is displayed in gray.
• When reading the patient ID is attempted, the glasses icon is not displayed.
• For the ID, alphanumeric characters and symbols (other than \, {, |, }) can be used.
Other control codes are not recognized by the LM-7/LM-7P. All unrecognized symbols are con-
verted to “~”.
• Pressing the clear button clears the ID and patient ID.
The operator ID is not cleared. To clear the operator ID, press and hold the barcode button
.
1707141668223 承認済
Uncontrolled copy when printed.