Nidek Medical LM-7, Operator'S Manual

Page: 22 / 108

20
2. BEFORE USE : Screen Configuration
14
Eye Care card button
Indicates the Eye Care card state.
Extended pressing of this button clears the data on the card.
15
Print button
Performs printing of locked measured data, data transmission, and writing to the Eye Care card.
The function and display of the button changes depending on the parameter setting.
When the button is pressed while measured data is not locked in, the data is automatically locked in
and printed.
Display Description
(white)
The Eye Care card is not inserted.
(blue)
The Eye Care card is inserted.
(green)
The Eye Care card is being accessed.
Never touch the card.
(red)
An error has occurred while the Eye Care card is being accessed.
Display Function
Parameter
Printer Com mode
Prints measured data. Extended pressing of the but-
ton feeds the paper.
When the device is connected to external equip-
ment, measured data is printed and transmitted at
the same time (except when the Com mode param-
eter is set to “Off”).
When the Eye Care card is inserted, data is written
to the card.
On -
Prints measured data with the printer of the con-
nected AR, ARK, or RKT.

“4.1.2 Connecting AR/ARK/RKT” (page 70)
When the Eye Care card is inserted, data is written
to the card.
AR print
NIDEK
NIDEK2
Outputs measured data to the connected external
equipment.
Printing is not performed.
When the Eye Care card is inserted, data is written
to the card. Off
NIDEK
NIDEK2
PC
NCP10
NCP20
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
1707141668223 承認済
Uncontrolled copy when printed.