Nidek Medical LEX-DRILL, Service Manual

Page: 73 / 94

LHM2A*RDA001A/E
7 - 31
3. Adjust the Hole depth parameter according to the number of holes.
Perform adjustment so that three holes are drilled and hole 4 is slightly made on the lens
front surface.
1) Display the Parameter screen. Select
“Parameter Setting” and display “Drill
Parameter 13/15” (see 7.5.1).
2) Press to highlight “Hole depth (V)” and
change the set value with or .
3) Seeing the table to the right, change the
set value according to the number of holes.
4) When the number of holes is five,
decrease the set value by 0.1.
5) It is the best that three holes (5 to 7) are
drilled and that hole 4 is slightly made on
the lens front surface. There are no holes
in the positions from 1 to 3.
Number of holes Compensation value guide