Nidek Medical Le 1000, Service Manual

Page: 41 / 152

LLE14BRDA001A/E
6 - 7
2. Attaching wheels
* For the attachment procedure and configuration of wheels, see “3.4 Wheel
Configuration”.
1) Apply the grease (NIPPECO LLP) to the motor shaft.
2) Apply the grease (NIPPECO LLP) to each wheel surface to which the motor shaft contacts.
3) Attach each wheel to the motor shaft seeing “3.4 Wheel Configuration”.
* Make sure that the marked surface orientation and rotation direction are correct
(see 3.4).
4) Loosely attach the hexagon bolt (40340-
M722) and wheel retainer (40347-M721)
by hand.
5) Attach the long offset wrench to the
hexagon bolt.
6) Tighten the hexagon bolt by turning the
long offset wrench toward the front of the
system while holding the wheels by hand.
* Torque the wheel fixing screw to 12 Nm.
7) Perform the wheel calibration (see
7.5.4).
8) Perform the processing adjustment (see
7.6).
/
/
/