![background image](http://html1.mh-extra.com/html/nidec/tnp-series/tnp-series_operation-manual_1687941003.webp)
3
Main Display (Description)
Extended Description
•
Units/Status indicator
– located on the upper part of the display this
shows the current units of measure selected for the torque meter. It also
serves as a sub display under function mode (F01, F02, F03, etc.)
Example: “OVR”
indicates an overload condition the TNP went over its
rated capacity.
“PWR”,
the auto power off feature is set this indicator
serves as a 1 minute warning before the unit turns off.
•
Main display/Set up Values
– shows the measured value in four digits
including decimal places. While under function mode, this displays the
options for each setting.
•
Direction Indicator
– indicates direction of applied torque based from F04
setting (Please see sign orientation information from function mode table).
By default, closing indicates a negative
“-“
values; Opening
“no sign”.
Battery Indicator
Direction Indicator
Main Display/ Setup Value
Units/Status Indicator
Overload
1 minute warning
before it turns off.
www.
GlobalTestSupply
.com
Find Quality Products Online at: