![background image](http://html1.mh-extra.com/html/nidec/tnp-series/tnp-series_operation-manual_1687941011.webp)
1
1
How to change the HI and LO values from the TNP torque meter?
•
To set the HI and LO limits from the TNP torque meter access the function
mode. (See
Diagram How to Access the Function
).
•
Power off the torque meter
•
Press and hold the Zero/RST key then power on the torque meter.
•
Continue to hold on the Zero/RST key until the main display shows F01
•
Press the Zero/RST key until the main display shows HI limit
•
Using the Recall key we can increment the highlighted digit from 0-9.
•
Press the Mem key to move from left to right or to the next digit.
•
Entering values that are invalid the display will blink momentarily indicating
wrong values entered to the HI and LO limits. (HI>LO, HI=LO).
After entering the LO limit value and pressing the Zero/RST button the
torque tester will go back to normal operation.
www.
GlobalTestSupply
.com
Find Quality Products Online at: