Nidec RK-3E, Instruction Manual

Page: 7 / 26

Operation Warning
Step the pedal all the way back
before turning the power switch off.
Do not operate any switches
with wet hand.
The wheelhead will not move if the
pedal was not all way back at last
power off.
- 6 -
①
③
②
①
Step the pedal all the way
back to stop wheelhead.
①
Turn the power switch on
②
The power indicater
lights up.
②
Turn the power switch off.
Turn the power switch off and unplug
the power cable for cleaning, testing
or adjustment. (It is recomended to
do the same if the wheel will not be
in use for a long period.)
Wipe the wheel down with a damp
sponge or cloth. (Splash pan can
be saturated if it is removed from
the wheel.)
DO NOT POUR WATER ON THE
WHEEL TO CLEAN IT.
③
Set the turntable direction.
④
Step the pedal forward from
the stop position to increase
speed.Step backward to re
duce speed,
The power switch has two functions. One
is to turn wheel on and off. The other is
a reset function. This wheel has a safety
feature for over load. In order to reset, op-
erator must switch off and on again. (Don't
forget to step the pedal all the way down
before turning switch back on.)
①
Stop the wheelhead by stepping
foot pedal all way back.
②
Change the selector for
opposite direction.
Never change wheelhead direction while
wheelhead is moving.
stop
stop
Stop
stop
faster
Using the wrench provided,loosen the
stopper bolt if the wheelhead does not strat
after replacing the foot pedal.
Lock nut
stopper bolt
①
Switch the on/off-breaker switch to the off
position (refer to diagram).
②
Return the foot pedal to the off position
(refer to diagram).
③
Turn the power switch back on.
Note: If you do not return pedal to the
off position the direction will not change
even if the Fwd/Rev switch is changed.
Note: If the pedal is not returned to the
off position before the power switch is
turned on the wheelhead will not turn;
your wheel will not respond.
Operation
Starting and Stopping
Operation Switching Directions
Operation
Power Switch
Mainteinance
Foot Pedal Replacement
Start
●
FWD
･･･
Clockwise
REV
･･･
Counter clockwise
Stop
●