Nidec PowerGear P110, Installation And Operating Instructions Manual

Page: 7 / 20

www.graessner.de
gmb / BA PowerGear_EN
Page 7 of 20
PowerGear HS S75 to S170
S version with type series L and KH
Type: Series L
Shown in ratio 1:1
Drive and output with solid shaft. Output (here) on both
sides, or on one side left or right.
Type: Series KH
Shown in ratio 1:1
Drive with coupling and lantern, output with hollow shaft
and key groove.
Shaft bearings with angular contact ball bearings, lubrication with synthetic gear oil ISO VG 150
4.3 Performance tables
PowerGear P Standard
Nominal torque
on output T
2N
(Nm) at
P54 P75 P90 P110 P140 P170 P210 P240 P280 P360 P450
I=1:1 15 45 78 150 360 585 1300 2150 3200 3750 6600
I=1.5 15 45 78 150 360 585 1300 2150 3200 3550 7000
I=2:1 12 42 68 150 330 544 1220 2010 3050 3500 7000
I=3:1 12 33 54 120 270 450 1020 1650 2850 3350 7000
I=4:1 28 52 100 224 376 860 1410 2300 2900 6600
I=5:1 25 40 85 196 320 740 1210 2000 2600 6000
PowerGear X reinforced version
Nominal torque
on output T
2N
(Nm) at
X54 X75 X90 X110 X140 X170 X210 X240 X280
I=1:1 24 87 135 290 625 1020 2050 3350 5200
PowerGear HS High Speed
Nominal torque
on output T
2N
(Nm) at
S75 S90 S110 S140 S170
I=1:1 25 45 78 150 360
I=1.5:1 25 45 78 150 360
I=2:1 24 42 68 150 330
The braking as well as the emergency stop moments are shown in the performance table in the catalogue, down-
load at
www.graessner.de . There you will also find the moments for the reinforced gear unit versions X54 to X280
as well as for the high-speed versions S90 to S170.