Operating Instructions
Control Panel
Temperature Dial
Low Liquid Level Alarm Indicator
Heater Indicator
Power Indicator
General Use
1. Ensure the bath has the required liquid level, then switch the unit
ON "I" using the mains switch at the rear of the unit.
Power indicator will illuminate.
2. Adjust the temperature control to the desired setting. Allow the
water temperature to stabilise and take an actual reading at the far end
of the bath to the Thermostirrer. Where necessary adjust the
temperature controller.
Heater indicator will illuminate.
Low Liquid Level Float Switch
The unit features a low liquid level float switch. This ensures heating
will be switched off if the liquid level falls below the recommended level.
The motor and heater are switched off in this instance. Use caution
when refilling the tank as hot elements can spit and create scalding
steam.
The Clifton Range - 3 Year Warranty
7
High Quality Products at Affordable Prices
