Location
The product must be placed on a smooth, level and sturdy work surface, preferably near a sink or drain
for emptying. Use in a ventilated room. Suitable for use in ambient temperatures 5°C to 40°C with a
maximum humidity 80% (temperature 31°C) decreasing to 50% (temperature 40°C).
Unpacking
Remove the product from its packaging. Any damage please notify your dealer immediately. Retain the
packaging over the warranty period. Contents consist of a thermostirrer mounted on a stainless steel
bridge unit to fit the slected tank, tank, stainless steel shelf, black nylon propellor, fasteners for securing
the thermostirrer to the tank, power lead and an instruction manual.
Assembly NE4-T series
Turn the thermostirrer upside down and screw the nylon propellor hand tight onto the spindle. The spindle
is threaded in the opposite direction to the propellor to ensure the propellor stays secure in use. Place
the stainless steel shelf into the tank. Fit the thermostirrer onto the tank aligning the slots in the bridge
unit with the holes in the side of the tank. Secure the thermostirrer to the tank using the the M4 screws
and washers supplied.
Turn the thermostirrer upside down and screw the nylon propellor hand tight onto the spindle. The spindle
is threaded in the opposite direction to the propellor to ensure the propellor stays secure in use. Place
the stainless steel shelf into the tank. Place digital thermostirrer mounted on stainless steel bridge onto
right hand end of the clear tank. Place clamping plate inbetween the tank rim and stainless steel bridge
- marked as “A” below. Fit screws into the bridge and clamping plate and tighten to secure the thermostirrer
to the tank.
Safety
Do not touch any electrical contacts or open any closure panels.
RISK OF ELECTRICAL SHOCK!
NE4-T series is Class 1 (IEC519 - Part 2) = low liquid level protection,
reference to over temperature condition providing product over
temperature protection.
Power Supply Lead and Connection to Electrical Supply
Fit the power lead by plugging it into rear of the Thermostirrer and then to mains supply.
Before connecting the product to the electrical supply, check the
information on the rating label is compatible.
IF IN DOUBT CONSULT AN ELECTRICIAN. THE PRODUCT MUST BE EARTHED!
Where the mains supply or plug connection differs refer to local
regulations or qualified electrician.
The Clifton Range - 3 Year Warranty
4
High Quality Products at Affordable Prices
Assembly NE4-E series
