background image

English – 

17

EN

12

PRODUCT DISPOSAL

This product constitutes an integral part of the automation and, therefore, must be disposed of together with it.

Similarly to the installation phase, once the product reaches the end of its useful life, the disassembly and scrapping operations must be performed by qualified 

personnel.

This product is made of various types of materials, some of which can be recycled while others must be scrapped. Seek information on the recycling and disposal 

systems envisaged by local regulations in your area for this product category.

CAUTION!

 – Some parts of the product may contain polluting or hazardous substances which, if released into the environment, constitute serious environmental 

and health risks.

As indicated by the adjacent symbol, the product may not be disposed of together with domestic waste. Sort the materials for disposal, acco 

ding to the methods envisaged by current legislation in your area, or return the product to the retailer when purchasing an equivalent product. 

CAUTION!

 – Local legislation may include the application of heavy fines in the event of improper disposal of this product.

13

TECHNICAL SPECIFICATIONS

WARNINGS:

 

 

All technical specifications stated herein refer to an ambient temperature of 20° C (± 5° C). • Nice S.p.A. reserves the right to apply modifications 

to products at any time when deemed necessary, maintaining the same intended use and functionality.

Type

Electromechanical self-braking gear motor for the automatic movement of sliding gates for industrial use, 

complete with electronic control unit DPRO500 

Pinion

Z = 18; Module = 6; Pitch = 18.8

Peak thrust

216 Nm

Nominal torque

65 Nm

Nominal torque speed

0.16m/s (9,50m/min)

Operating limits

TUB4000 is generally capable of automating gates up to 4000 Kg in weight and 30 m in length.

Power supply

3~ 400V ac +/-10%; 50Hz.

Max. absorbed power

580 W

Nominal absorption

1,6 A

Insulation class

1 (a safety earthing system is required)

Operating temperature

-20°C ... 55°C

Protection level

IP 54

Dimensions (mm)

580 x 480 x 240

Weight

60 kg

Summary of Contents for TUB4000























Reviews: