English –
8
EN
3.7 - Climatic sensors
3.7.1 - SETTING THE INTERVENTION LEVEL FOR “WIND” PROTECTION
01.
Press the button
ON
: the current setting will appear on the level LEDs.
If no “wind” protection, has been set, the level LEDs flash simultaneously.
02.
Use the
or
button to turn on the LED that corresponds to the desired
setting.
03.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
Note:
The number of levels available depends on the type of motor connected and the
maximum and minimum values of this motor.
3.7.2 - ENABLING/DISABLING OF CLIMATIC SENSORS
This button allows you to enable/disable the intervention of the SUN and RAIN sensors.
If the function is active, the corresponding LED will be lit, otherwise off.
01.
Press the button
ON
to activate/deactivate the SUN and RAIN sensors: the cor-
responding LED starts flashing.
02.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
3.7.3 - SETTING THE INTERVENTION LEVEL FOR “SUN” PROTECTION
01.
Press the button
ON
: the current setting will appear on the level LEDs.
If no “sun” protection, has been set, the level LEDs flash simultaneously.
02.
Use the
or
button to turn on the LED that corresponds to the desired
setting.
03.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
Note:
the number of levels available depends on the type of motor connected and the
maximum and minimum values of this motor.
3.7.4 - SETTING THE DIRECTION OF ROTATION OF THE MOTOR IN CASE OF RAIN
01.
Press the button
to invert the direction of rotation of the motor in case of rain.
02.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
3.6.5 - SETTING THE LEVEL OF SENSITIVITY TO OBSTACLE / DRC
01.
Press the button
RDC
: the current setting will appear on the level LEDs.
02.
Use the
or
button to turn on the LED that corresponds to the desired
setting.
03.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
Note:
the number of
levels available depends
on the type of motor
connected.
Examples of levels available for ERA INN
Level LEDs
Level
1
LEVEL 1
2
LEVEL 2
3
LEVEL 3
4
LEVEL 4
5
LEVEL 5
6
LEVEL 6
7
LEVEL 7
8
LEVEL 8
3.6.4 - SETTING THE LEVEL “SOFT-START” AND “SOFT-STOP”
01.
Press the button
RDC
: the current setting will appear on the level LEDs.
02.
Use the
or
button to turn on the LED that corresponds to the desired
setting.
03.
➔
The
green OK
LED flashes: (within 3 sec) press the
OK
button to confirm.
Note:
the number of
levels available depends
on the type of motor
connected.
Examples of levels available for ERA INN
Level LEDs
Rpm acceleration/deceleration
1
0.0
2
0.7
3
1.5
4
2.0
5
2.5
6
3.0
7
3.5
8
4.0
