Nice TT6, Instructions And Warnings For Installation And Use

Page: 8 / 120

6 - English
EN
60 Delete transmitter
65 Delete all memorised transmitters
66 Delete motor parameters
20 Memorise the motor upper limit switch in current
position
21 Memorise the motor lower limit switch in current
position
22 Memorise partial position 1 in current position
23 Memorise partial position 2 in current position
24 Memorise partial position 3 in current position
25 Memorise partial position 4 in current position
26 Memorise partial position 5 in current position
27 Memorise partial position 6 in current position
30 Delete upper limit switch setting
31 Delete lower limit switch setting
32 Delete partial position 1
33 Delete partial position 2
34 Delete partial position 3
35 Delete partial position 4
36 Delete partial position 5
37 Delete partial position 6
05 Up
12 Move a little step up
03 STOP
sent to the device: some commands
do not require data (for example, the
Open command), while others do (for
example, the Open percentage com-
mand).
[Carriage Return] Decimal code 13, hexadecimal code
0D; it must always be present and each
string sent must end with this charac-
ter.
For each command sent, the interface must provide a
response that simply indicates the command reception
(this, however, does not imply that the command has been
executed by the automation). It is a notification that will
currently have a very simple construction, such as the fol-
lowing:
RSP [XX] [YY] [ZZ] [
Optional data field
] [Carriage Return]
5.5 – Commands list
CMD Description
45 READ PERCENTAGE POSITION 0 - 255
Low limit switch 255 = High limit switch
04 Down
40 OPEN percentage command percentage 0 - 255
0 = Low limit switch 255 = High limit switch
50 Read memorised transmitters
51 Memorise transmitter