Nice TT6, Instructions And Warnings For Installation And Use

Page: 3 / 120

English - 1
EN
Original instructions
ENGLISH
1 – WARNINGS
• Caution! It is important to observe these instruc-
tions to guarantee the safety of persons.
• Caution! Important safety instructions: store these
instructions in a safe place.
• Caution! All product installation, connection, pro-
gramming and maintenance operations must be
performed exclusively by a qualified and skilled
technician!
• Do not effect modifications to any part of the product
other than those specified in this manual. Unautho-
rised operations can lead to hazards and cause mal-
functions.
The manufacturer declines all liability for dam-
ages caused by makeshift modifications to the product.
• Important! - Do not use substances containing alcohol,
benzene, diluents or other flammable substances. Use of
such substances could damage the product.
• Store this manual with care in a safe place to facilitate any
future product maintenance and programming opera-
tions.
• The product packaging material must be disposed of in
full observance of current local regulations governing
waste disposal.
• Use a soft and slightly damp ( not wet! ) cloth for cleaning
the product’s surfaces.
2 – PRODUCT DESCRIPTION AND INTENDED
USE
The TT6 control unit is designed for use in automation sys-
tems applied to awnings, shutters, skylights, vertical cur-
tains, blinds and for controlling video projection screens.
Any other use is to be considered improper and is
strictly prohibited! The manufacturer declines all liabil-
ity for damage resulting from improper use of the
product and other than as specified in this manual.
The product comprises the following:
- Output for controlling a wire technology motors (for
example, One-Max, To-max or NeoM); the output can be
activated directly through the two buttons:
Pup (

) and
Pdown (

);
- TTBUS interface for controlling Nice motors with bus sys-
tem.
- RS232 interface for connection to PC.
- Activation input (Trigger) for activating or deactivating a
sequence of motors (near the up or down trigger).
The radio interface expands the product’s remote control
range through the Nice radio technology.
3 – INSTALLATION
01. Remove the top cover of the control unit ( Fig. 1 ).
02. In the zones marked accordingly, drill the holes for
routing the cables and for fixing the control unit to the
wall.
Caution! – Take suitable precautions to
guarantee the IP protection rating required for
the type of installation. In particular, apply cable
clamps (not supplied) to protect the power