Nice TT6, Instructions And Warnings For Installation And Use

Page: 11 / 120

English - 9
EN
5.5.7 – Memorise partial position 1, 2, 3, 4, 5, 6
and limit switch 0 and 1 positions
Assigns the current position to a variable position.
Structure
The data field is empty.
Example
Response
5.5.8 – Delete partial position 1, 2, 3, 4, 5, 6 and
limit switch 0 and 1 positions
Deletes the entered position.
Structure
The data field is empty.
Response
5.5.6 – Move a little step up
Sends an “up” command that it make the smallest move-
ment that the motor can do. Use to set the right position
before setting the limits switch or the partial positions.
Caution: the up and down directions are correctly
assigned after setting the relevant limit switches.
Structure
The data field is empty.
Example
Response
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
RISP 01 04 13 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
CMD 01 04 12 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
RISP 01 04 12 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
CMD IND 04 12 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
CMD 01 04 20 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
CMD IND 04 – – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
RISP 01 04 20 – –
Start TT ADR
[XX]
TT ENDPOINT
[YY]
Command
[AA]
Data CR
CMD IND 04 – – –