Nice TITAN12L, Manual

Page: 5 / 36

www.hysecurity.com
5
1.4 936 Control Board
The 936 control board is housed in a protective
plastic enclosure that includes two 7-segment
LEDs, fi ve dedicated programming buttons and
three buttons for navigation of the setup and
programming menus, as well as 3 buttons for
open, close, and stop. Connectors for power, input
and output peripherals are arranged around the
edges of the board and clearly labeled. A plug-
in connector is provided for direct installation of
a Nice-brand receiver which can be associated
with up to 1000 remote controls. Connectors for
other Nice-brand plug-in accessories include the
2-wire Bluebus photocells for external entrapment
protection. Dry contact inputs are provided for
loop, probe, and photoelectric detectors as well as
guard station inputs and fi re department control.
Voltage outputs (+12VDC and +24VDC) are
available to power other safety and entrapment-
prevention devices, along with a solenoid lock
output.
The 936 control board accepts DC input voltage
ranging from +10VDC to +35VDC with input
polarity protection on the main input and the solar
charge input. All settings are stored in non-volatile
memory that is protected from power outages.
Programmable slowdown position. Built-in current
sensing provides inherent gate force monitoring
and limiting for safety. The “Learn” function helps
the gate installer confi gure the 936 control board
semi-automatically for optimum settings of gate
opening and closing speeds.
1.5 936 Main Control Board Specifi cs
 Inputs for solar panels and batteries.

Motor outputs for two motors.

Low power consumption in stand-by mode.
 Built-in charge regulator to maintain battery
charge.
 Socket for plug-in Nice receiver.

Easy setup with 7-segment LEDs and dedicated
buttons.

Setup and learning stored in onboard memory.
 Digital programming for auto-close timing,
force, speed, and opening delay.
 On-board buttons for operating the gate (Open,
Close, Stop)
 Inputs for guard station, additional third party
receivers, loop detectors, Fire, and UL/Edge
signals.
 Two relay outputs (not programmable).

Surge suppression on every peripheral input
and output, up to 1200A.

Bluebus port for Nice plug-in, self-monitored,
entrapment protection devices.

USB port and bootloader for easy software
updates.

M o t o r b y p a s s c o n n e c t o r s f o r r a p i d
troubleshooting an actuator and positioning
a gate.