Nibe SCA 41, Installer Manual

Page: 38 / 84

Upper pipe mounting
1. Install 3 x cable ties in the enclosed pipe mountings.
2. Install 7 x cable ties with clips in the enclosed pipe
mounting.
x 3
x 7
x 3
x 7
3. Install the pipe mounting on AHPS with the screws
that secure the top panel.
LEK
Valve connector (WP5-GP31)
1. Connect the supplied valve connector (GP31) on
the connections for hot water (XL4) respectively
cold water (XL3) on AHPS (CP1).
2. Screw in the two plugs (R15).
LEK
GP31
plug
NOTE
2 o-rings and 1 clips are used for each quick-
release connection.
Connections
1. Route the pipe from the T-coupling to the cold
water connection (XL3) on valve connector (GP31).
LEK
Incoming cold water
GP31-XL3
T-coupling
38
GB