background image

14

BA-ST 9022-9100-FE

Chapter 6 |

Chapter 7 |

Chapter 8 |

Accessories and spare parts

Service

Recycling and disposal

Report any malfunctions in the buff er tank operation 

to the authorized service centres. 

7 Service

The storage tank may only be repaired/servi-

ced by an authorized service since improper 

repair can cause safety risks, and the loss of 

product warranty.

CAUTION

In order to prevent damage to piping systems 

and environmental pollution, the product sho-

uld only be disassembled and taken out of 

service by appropriately qualifi ed specialists.

CAUTION

At end-of-life, take care that the product and 

all the equipment were disposed of in accor-

dance with applicable regulations.

CAUTION

8 Recycling and 

 disposal

According  to  the  NIBE-BIAWAR  rules,  the  products 

have been manufactured of high quality materials us-

ing the latest technologies and solutions that do not 

endanger the environment.

When selecting materials, we took into account both 

the  possibility  of  reuse  of  materials  (recycling)  that 

can be disassembled and separated from materials 

unsuitable for recycling, as well as risks arising from 

the processing of materials not intended to reuse.

The purchased device consists in more than 90 % of 

parts that can be recycled and reused, so they are 

safe for the environment and human health.

The packaging, in which the product is de-

livered, is made mainly of materials suitable 

for recycling and utilization. After installa-

tion, you should ensure the proper disposal 

of packaging in accordance with applicable 

regulations.

INFORMATION

Storage tank 

model

Inspection 

opening dia.

Type of 

gasket

BA-ST 9022-FE

BA-ST 9030-FE

BA-ST 9040-FE

BA-ST 9050-FE

ø 120

Flanged 

gasket 

ø 150

BA-ST 9075-FE

BA-ST 9100-FE

ø 180

Flanged 

gasket 

ø 180

Type

Application

Mounting kit for electric heating 

module - 

1½” female

BA-ST 

9022-9050-FE

Mounting kit for electric heating 

module - 

2” female

BA-ST 

9075-9100-FE

Fig. 16. 

Mounting  kit  for  electric  heating  module  –        

– fl anged cover with 1 ½” or 2” sleeve.

Table 5. 

Mounting kit for electric heating module

Table 4. 

Inspection opening gaskets

Summary of Contents for BA-ST 9022 - FE





















Reviews: