![background image](http://html1.mh-extra.com/html/nibe/ag-ch10-series/ag-ch10-series_installer-manual_1686341015.webp)
1. Locate the connection for AG-CH10 on the outdoor
unit.
2. Secure the drain pipe, as illustrated.
1.
2.
3.
LEK
1.
2.
3.
LEK
1.
2.
3.
LEK
3. Route the heating cable through the condensation
water pipe.
4. Pull the insulation down slightly, connect the hose
to the drain pipe and tighten the hose clamp, as il-
lustrated.
LE
K
1.
2.
3.
5. Lay the heating cable so that the marking is as close
to the drain pipe as possible, as illustrated.
LEK
Drain spout
Marking
6. Connect the cable to the enclosed electrical distribu-
tion box according to section "Connection of the
heating cable" on page 13. (Check the fuse according
to the table, see page 13.)
NOTE
Do not cut the heating cable!
15
AG-CH10 | GB