English
General
The accessory AG-CH10 is used to safely lead away most
of the condensation from the air/air heat pump to a
frost-free collection point.
The accessory applies to NIBE's following products:
■
AG-AA10
■
AG-AC10
NOTE
It is important to the heat pump function that
condensation water is led away and that the
drain for the condensation water run off is not
positioned so that it can cause damage to the
house.
The heating cable starts automatically at an outdoor
temperature of 0 °C. When the temperature exceeds
2 °C the heating cable switches off again.
NOTE
The installation of AG-CH10 is critical to the
machine's function. Read the entire manual!
TIP
Also see the Installer manual for AG-AA10/AG-
AC10.
Contents
Insulated hose (inner diameter 40 mm)
1 x
Electrical cabinet
1 x
Drain spout
1 x
Heating cable
1 x
Hose clamp
1 x
Fuse
1 x
Cable ties
2 x
AG-CH10 available in three lengths
AG-CH10 is available in three lengths. Here you can see an example of the installation length.
Installationslängd
Installation length
Installation length
Hose length
Product
Name
Part No.
1 m without water seal
1 m
AG-AA10 and
AG-AC10
AG-CH10-10
067 466
1–2,2 m with water seal
3 m
AG-CH10-30
067 467
2,2–5,2 m with water seal
6 m
AG-CH10-60
067 468
AG-CH10 | GB
10
