57
TYRE PRESSURE
Often check that tyre pressure be within the
limits of 1-1,2 bar (Kg/cm
2
).
Fig.13
Fig.14
LUBRICATION (Fig. 13)
TYPE OF LUBRICANT
Engine:
see engine manual.
Motorcultivator:
use only ESSO UNIFARM
15-40 W oil and ESSO MULTIPURPOSE
grease.
1) ENGINE
Every day:
check level and top up if neces
-
sary.
Oil replacement:
to be carried out according
to intervals and methods set out by the engine
manufacturer.
2) GEARBOX
(capacity 2,5 Kg)
Every 20 hours:
check level and top up if
necessary.
Every 500 hours:
replace oil.
3) POWER TAKE-OFF FOR IMPLE-
MENTS
Before attaching Implements, fill up with
Multipurpose grease.
4) ROTARY HOE BOX
Capacity 0,7Kg.
Every 20 hours:
check level and, if neces
-
sary, top up through the clearance hole close
to screw A.
Make sure to reassemble the screw together
with aluminium washer B in order to guaran
-
tee tightness.
Every 500 hours:
replace oil.
GEAR BOX OIL REPLACEMENT
(Fig. 14)
Oil must be replaced when hot, by unscrewing
fill cap A and fill cap B equipped with an oil
dipstick. When oil is completely drained,
replace cap A and pour the new oil through
hole B (2,5 Kg). Check level by using dipstick
on cap B. This operation is to be done with
motor cultivator in horizontal position.
