40
FRONTAL MOWER BAR APPLICATION
Connection to motor cultivator
The mower bar is attached to the motor
cultivator by means of the Quickfit
connection.
Mower height adjustment
When working on bad terrain, it is
necessary to adjust the mower’s cut
height in the following way:
- Loosen nut 1.
- Bring the skid pad back to wanted
position 2
- Lock the nut again
- Carry out adjustment on both skid
pads
Blade holder adjustment
- Loosen
fi
xing screws 3.
- Turn the adjustment screws 4.
- Tighten the
fi
xing screws again
N.B
.: Excessive friction between the
blade holder and the blade must be
avoided in order to guarantee good
functioning.
Mower blade replacement
- Loosen screws 5.
- Remove blade catch 6
- Slip off the blade
To re-mount the blade carry out the same
operations but in reverse order.
S E R V I C I N G T H E B A R W I T H
C O N N E C T I N G R O D - C R A N K
MECHANISM
Each time the mower is used apply
grease to points 7 and 8.
AIRBORNE NOISE
Maximum level of weighted equivalent continuous sound pressure
MOTORCULTIVATOR TYPE
1 + 1
2 + 2
MOTORCULTIVATOR
77,7 dB (A)
80,8 dB (A)
MOWER
83 dB (A)
84,9 dB (A)
MOTORCULTIVATOR TYPE
1 + 1
2 + 2
ENGINE TYPE
HONDA G X 160
/TECUMSEH
INTERMOTOR LGA 225
TEST R.P.M.
3050
HANDLEBAR VIBRATION
Measurement with weighting according to ISO 5349
MOTORCULTIVATOR TYPE
1+1
2+2
MOTORCULTIVATOR
4,5
m/s
2
4,5
m/s
2
MOWER
13,4 m/s
2
13,4
m/s
2
Fig.21A
