NI Climbing Frames Mount Juliet, Instruction Manual

Page: 32 / 53

Step 23:
•
Now the tricky part. The ‘A’ -frame is designed to be at an 82° angle (i.e it is not at 90 degrees
to the ground)
•
The ‘A’ -frame should be then lined up to the centre of the frame
•
The holes on the ground should then be marke d and the ‘A’ -frame should be sunk into its
place so that the monkey bar is level. If your garden is level, holes about 250mm-300mm will
suffice. If your garden is running at a slope, you may need to dig the holes deeper or
shallower depending on which way the ground is falling. The aim is to level the monkey bar
as well as th
e 3” x 1.5” support on the A frame