NI Climbing Frames Mount Juliet, Instruction Manual

Page: 12 / 53

Assembly Instructions
All components needed during the assembly are numbered with reference to the parts list, please
refer back to the parts list to ensure you are assembling the correct components for each step.
Step 1: ‘H - Frame’ Assembly
•
Lay 2 3m posts that are cut at a 40° angle on a level surface
•
Ensure the cut angle is facing the same way on both posts and the holes are on the outside
Step 2:
•
Place the 1575mm 4” x 4” post between the 2 longer posts and line up with the 32mm holes
about halfway down the posts. Screw the posts together on both sides using the 200mm
index screws. Use 2 screws for each 32mm hole