NI Climbing Frames Highlands Commercial, Instruction Manual

Page: 35 / 45

Step 26: Steps Assembly
•
The steps might have to be cut or dug into place (depending on the slope of your surface)
•
They are secured using decking screws through the top and sides of the steps into the base
of the tower. Ensure these holes are well pre-drilled to avoid splitting. The holes and screws
will have to be angled to the surface of the steps.
•
Also, the bottom of the steps will need fixed to the ground, whether it be grass or hard
surfacing.
•
Grab handles are then placed on the top of the steps.
•
Repeat for both sets of steps.