NHP TemBreak PRO P, User Manual

Page: 5 / 66

5
TemBreak PRO
P_BE-UM-001-EN V1.3.0
Introduction
This user manual describes the TemBreak
PRO Basic Electronic ( P_BE ) MCCB features and instructions for use, and provides information for
commissioning and configuring.
Some additional features may require the use of additional products and accessories to achieve full utilization of that feature. Refer the respective User
Manual in the TemBreak
PRO series for additional information on the respective product.
Who Should Use This Manual?
This manual aims to provide users, electricians, panel builders and maintenance personnel, with the technical information required for commissioning and
operation of the NHP / Terasaki TemBreak
PRO P_BE MCCB.
Users of this document must have at minimum a basic understanding of electrical circuit protection topics including (but not limited to):
-
Power distribution and reticulation
-
Circuit protection devices
-
Fault currents
-
Arc faults
-
Temperature rise and thermal derating of switchgear
Additional resources
The following resources contain additional information which should be read in conjunction with this document.
Resource Description
NHP/Terasaki TemBreak PRO P_BE Installation
Instructions
P160_3_BE-IN-001-EN
P160_4_BE-IN-001-EN
P250_3_BE-IN-001-EN
P250_4_BE-IN-001-EN
P400_3_BE-IN-001-EN
P400_4_BE-IN-001-EN
P630_3_BE-IN-001-EN
P630_4_BE-IN-001-EN
Information on installing, mounting, and wiring the TemBreak PRO Basic Electronic
MCCB.
Notice : Not all OCRs in the TemBreak PRO series are identical. This document specifically covers the P_BE
OCRs only. Refer to the respective OCR User Manual (e.g. B_SE, P_SE, etc.) for information and instructions
on other OCRs in the TemBreak
PRO series.