comfor t
10
To Control Fan Speed:
1
Press
Manual Fan Speed buttons 2
and
5
to manually adjust fan speed
UP
or
DOWN
. The fan speed indicator will illuminate on the center Display
Screen and the system will change from AUTO mode to MANUAL mode
(“
MANUAL
” appears in the top center area of the center Display Screen).
2
Press the AUTO A/C button again to return to automatic control of fan
speed.
To Change from A/C Mode to ECON (Economical) System Operation Mode:
Press
ECON button 6
to change from
A/C
Mode to
ECON
(Economical) Mode.
In ECON Mode, a comfortable temperature is maintained and some load to the
engine is reduced to improve fuel economy.
A square indicator light next to the ECON location on the center Display
Screen illuminates green when ECON Mode is operating, and “
ECON
” appears
in the top right corner of the center Display Screen.
To Turn Heat ON:
1
Press the
ECON button 6
two times. The square indicator light next to the
ECON location on the center Display Screen will turn
OFF
, and “
ECON
” will
no longer appear in the upper right-hand corner of the center Display
Screen.
2
Turn either the
AUTO A/C
(in AUTO setting) or
AUTO PASS
temperature
control knob (in DUAL setting) to set the desired temperature. The
temperature of the cabin will be automatically maintained to
the set temperature. Air flow distribution and fan speed are
also controlled automatically.
To Choose Fresh or Recirculated Air:
Press the
Fresh Air/ Air Recirculation (Intake Air Control)
button to
select between:
Fresh (outside) air
for cooling/heating/defrosting. The green
indicator light on the
side of the button will illuminate
when fresh air is selected.
Recirculated (inside) air
for maximum A/C cooling
performance and to prevent unwanted outside odors from
entering the vehicle. The green indicator light on the
side of the button will illuminate when recirculated air is
selected.
Note: Extended use of recirculated air may cause the inside of the windows to fog up.
To Manually Change Air Flow:
Driver:
Press
DRIVER button 1,
and
Passenger:
Press
PASS button 3
to select air flow location.
Note: The air flow indicator symbols will illuminate on the center Display Screen.
Driver-side symbols are shown here.
Air flows
from center
and side
vents.
Air flows
from center
and side
vents,
plus
foot outlets.
Air flows
mainly from
foot outlets.
Air flows from
the front
defroster and
foot outlets.
1
ROUTE
ZOOM IN
ZOOM OUT
5
2
CANCEL
3
MANUAL
ECON
ECON
6
VOICE
6
VOICE
6
ECON
6
