NF HVA4321, Instruction Manual

Page: 28 / 152

2.3 Grounding and power supply connection
HVA4321
2-4
b)
Connection of power cable
Insert the connector of the power cable accompanying the unit into the inlet of the back panel.
Figure2-3. Inserting power cable connector
c)
Inserting the power outlet
This unit operates with the power of AC100V
±
10%. Insert the power cable plug into the power outlet
with the protective ground. Use the accompanying power cable and insert it into the power outlet with the
ground. The casing of the unit is then grounded.
Using 3-pin 2-pin adapter
When 3-pin 2-pin conversion adapter is sued, be sure to connect the ground wire of the conversion
adapter to the ground terminal near the outlet.
Figure2-4. Using conversion connector
～
LI NE
100V
50Hz ／ 60Hz 800VA MAX
コ ネク タ を差し 込む
Insert the connector.
Ground
3-pin 2-pin adapter