43
If you do not hear a beep from the
Console when you register a Door/
Window Sensor or Motion Detector.
With the Console NOT armed check that
it chimes when you press
TEST
on the
Door/Window Sensor, or the alarm trips
when you press test on a Motion Detector
(when the system IS armed). If it does,
then the sensor is already installed and no
further action is necessary. If not:
• Re-register the sensor/motion detector
(see Setting Up Door/Window Sensors
and Setting Up Motion Detectors.
If the battery indicator on the Console is
on.
Replace the Console’s batteries.
Four x AA alkaline batteries provides
approximately 12 hours of backup.
Replace batteries at least once a year.
If you lose your remote control.
Reinstall your complete system to prevent
someone else from using the lost remote
control. See bottom of page 39.
If the system Arms or Disarms by itself
A neighbor may have a compatible
system. Reinstall the complete system so
that it chooses different RF codes. See
bottom of page 39.
If the light on the Keychain Remote stays
on during initialization.
Remove the batteries, press a button
for a few seconds, release, then replace
the batteries. Press and hold the ARM
button on the Keychain Remote for a
few seconds and then release it. This
initializes the remote and picks a random
code that is used when it is registered with
the Console. Re-register the remote.
PROBLEM
SOLUTION
Troubleshooting