manualshive.com logo in svg

NexxTech 49110000, Owner'S Manual, Page: 4 / 46

Share
Download
NexxTech 49110000 Owner'S Manual Download Page 4

 

 

4

The Nexxtech

TM

 Wireless Home Security System includes a Main Console with an 

automatic dialer that calls neighbors or friends in the event of a break in. Two battery 

powered Wireless Door/Window Sensors are included  to trigger the alarm when a door or 

window is opened.  A battery powered RF Motion Detector is also included to protect an 

indoor area (batteries are not included). The Keychain Remote Control is used for arming 

and disarming the system.  It can also turn lights on and off (requires Nexxtech

TM

 Home 

Automation Modules). All sensors and remotes incorporate random digital security coding.  
The system may be configured with any combination of the following items:
•  Up to 16 Keychain Security Remotes with arm/disarm and panic functions, and buttons 

to control security lights in and around the home. 

•  Up to 30* magnetic switch operated Wireless Door/Window Sensors.
•  Up to 30* Wireless Motion Detectors. 
•  Additional Home Automation modules such as plug-in lamp and appliance modules and 

wired-in replacement wall switches can be added to the system to flash lights on and off 

when the alarm trips.

*Note: Door/Window Sensors and Motion Detectors may be added in any 

combination up to a total of 30, e.g., 15 Door/Window Sensors and 15 Motion 

Detectors, or any combination up to a total of 30. There are also 2 hard wired inputs, 

which are zones 31 and 32.

Additional accessories available are shown below.

Motion Detector

4911003

Door/Window Sensor

4911001

Keyfob Remote

4911002

Introduction

Summary of Contents for 49110000















































Reviews:

No comments