42
You open a door or window and the alarm
does not trip.
• Check that the system is armed.
• Check to see if the alarm trips when
you press
TEST
inside the Door/
Window Sensor.
• If the alarm does not trip when you
press
TEST
, check that the indicator on
the sensor comes on when you press
TEST
.
If the indicator does not come on, replace
the batteries and reinstall the sensor if
necessary.
If appliances turn off during an alarm.
The system flashes lights by repetitively
transmitting the SECURITY light on and
off codes.
Any Appliance Modules set to the same
codes will therefore turn on and off.
If you do not hear a beep from the
Console when you press
ARM
to install a
Remote.
• Re-initialize the remote (see page 12).
PROBLEM
SOLUTION
Troubleshooting